Device Plate for PRC Accent 1400

View product →

DP-PRC1

The Device Plate DP-PRC1  attaches to PRC's Accent 1400.   The Quick Release Plate attaches directly to the DP-PRC1 device plate.  These plates stay on the back of the Accent 1400 even when it is removed from the Mount'n Mover arm.

View product →

Device Plate for PRC Accent 1400 (DP-PRC1)

Remove the existing PRC mounting bracket and replace it with the DP-PRC1 plate.  The Quick Release Plate (QRP)  attaches to this PRC1 plate.   

View product →

RAM Quick Grip Phone Holder with 1" Ball

Spring loaded for one handed docking and removal.  Adjustable side supports. Use with RAM base plate and a RAM extension arm (not included) to offset to side of tray or device.  Mount directly to a tray or to the Quick Release Plate.  And many more options!

View product →

RAM base device plate

RAM BASE PLATE for attaching to tray or speech to hold phone etc.   Does not include x-grip or quick grip phone holder.  Plate only.  Pictures show how it is used in combination with the x-grip and quick grip.  Pictures also show how it is attached to back of tray or speech device.  Fits most speech devices.

View product →

Tilt Plate Adapter for CJT Products

Use this adapter so you can attach a device with a Mount’n Mover Quick Release Plate to a CJT Floor Stand, Table Stand or mount.

To install:

Insert the TPA-CJT into the CJT receiver. That’s all there is to it.

Now, you can remove a device from a Mount’n Mover and attach the Quick Release Plate to their products.

View product →

Tilt Plate Adapter for Daessy

Now Available!

An easy way to make a Mount'n Mover Quick Release Plate attach to a Daessy Table/Floor Stand or a Daessy wheelchair mount --in just one step!

1. Insert the Tilt Plate Adapter into the Daessy TUSB

You have now made your Daessy Floor/ Table Stand or wheelchair mount compatible with the Mount'n Mover Quick Release Plate!

Daessy TUSB plate not included.

View product →

EyeGaze Edge Device Plate

This device plate attaches to the EyeGaze Edge

View product →

DP-E1

this device attaches to the EyeGaze Edge

View product →

Device Plate (DP-E1)

This device plate attaches to the EyeGaze Edge 

View product →

DP-E1

This device plate attaches to the Eyegaze Edge 

View product →

Device Plate (DP-E1)

View product →

Device Plate DP-E1

View product →

Device Plate T-3

This device plate attaches to the back of the Tobii Dynavox Eyemobile.  The spacers allow for space to use the adjustment knob.  

View product →

Device Plate T-3

This device plate attaches to the back of the Tobii Dynavox Eyemobile.  The spacers allow for space to use the adjustment knob.  

View product →

Device Plate Extension

This device plate has a variety of uses.  It is often used for eyegaze devices to raise the device up vertically in order to clear the white hoop and black paddle.  It can also be used to offset a device or tray to one side or the other.  

View product →

Tobii Dynavox I13 and I16

The DP-T5 is made up of two parts: 

1. The QCR (Quick Connect Receiver) and  2. The DP-1x2. 

The DP-T5 is compatible with both the Tobii Dynavox I13 and the I16.

NOTE:  Our Easy Mover (non-locking mount) can be attached directly to the back of the Tobii I13 or I16.  This will enable use of the infrared option. (see picture)

Instructions for attaching the Tobii I13 or I16 to a Tilt Plate

Instructions for using the IR Remote Control Access and for attaching the Universal Rotator (DP-UR)

View product →

DP-T4

Device Plate DP-T4 is used to connect to the Tobii Dynavox i110.

View product →

DP-T4

Device Plate DP-T4 attaches to the Tobii Dynavox i110

View product →

Device Plate

Device Plate DP-T4 attaches to Tobii Dynavox I110.  

View product →

Tilt Plate Adapter with Quick Connect Plate

Now Available!

An easy way to make a Mount'n Mover Quick Release Plate attach to a Rehadapt/Connect-it Table/Floor Stand or a Rehadapt wheelchair mount --in just one step!

1. Insert the Tilt Plate Adapter with a Quick Connect Plate into the UDS

You have now made your Rehadapt Floor/ Table Stand or wheelchair mount compatible with the Mount'n Mover Quick Release Plate!

Tilt Plate Adapter with Rehadapt Mount

NOTE:  Rehadapt Universal Device Socket (UDS) is  Not Included

View product →

Device Plate DP-QCR-E

Attaches to  devices:    Eyespeak 18 and Zuvo 18, Smartbox Grid Pad 12, PRC Accent 1400 with Look Eye Tracking Module

Consists of Extension Plate and the DP-Quick Connect Receiver (QCR)

Use the DP-QCR-E plate when you need the DP-QCR (Quick Connect Receiver) to be higher than direct attachment to the Quick Release Plate (QRP)

This is especially important for some eye gaze or larger devices where you want it to be tilted vertically

QCR Extension Plate (DP-QCR-E) extends the attachment height location of QCR (Quick Connect Receiver) relative to the Quick Release Plate (QRP)

DP-QCR-E Plate attaches to QRP (Quick Release Plate) and DP-QCR attaches to the DP-QCR-E

Range of locations from the bottom of the QRP to top of the QCR:

Range of locations on QRP itself: 2", 3", 4", 5"
Range with the addition of the DP-QCR-E: 7.5", 8.5", 9.5", 10.5"

QCR attachment holes also allow for a lateral offset of the DP-QCR to either the right or left of the QRP

Instructions on attaching DP-QCR-E

View product →

QCR Extension Plate

Extension Plate is used to place the QCR higher up on the device it is attaching to. This is especially helpful for eye gaze devices, to be sure the device clears the hoop in an upright position. 

The QCR attaches to the top of the Extension plate; and the Quick Release Plate attaches to thereaded inserts on the lower section of the Extension Plate.

View product →

Device Plate - i110

Used to attach to a Tobii i110

View product →

Quick Connect Receiver

Compatibility:

• Speech devices
  • The Quick Connect Receiver (QCR) is compatible with many speech devices--via plates and molded recesses within speech device cases
  • The DP-QCR cannot be used "alone" with Tobii Dynavox i-12 and i-15 devices.  It must be used in combination with the DP-T2 (contact us!).
  • Disclaimer: There may be some plates and devices we have not tested which do not work

• Mount'n Mover compatibility
  • The QCR (DP-QCR) can be attached to a Mount'n Mover Quick Release Plate for use with the Original Mount'n Mover, to make it compatible with various speech devices.
  • Attach Quick Connect Plate (DP-QCP) to Mount'n Mover trays to make them compatible with the QCR  .

• Mounts with built-in QCR
  • Easy Mover with Quick Connect Receiver (EM1-QC, EM2-QC)
  • Easy Mover with Tilt Plate (EM1-TP, EM2-TP)
  • Simple Mount with Quick Connect (SM-QC)

How it Works

Release Lever and Catch:

• The red release lever is spring-loaded
• It will automatically engage when it reaches the hole or retaining ledge in the device or plate
• It is difficult to accidentally release, requiring an intentional and specific action to release
• Press the curved tab with a finger or thumb to retract the catch. It takes very little force, making it easy to release
• Because it mates with a wide range of devices, it is looser on some than others to accommodate variability in plates

Attachment steps:

1. Align the Quick Connect Receiver (QCR) with the recess (or plate) on the back of the device you are attaching
2. The spring-loaded release lever offers a little resistance, so you need to first push the device (or plate) into the Receiver, and then slip it down into place 
3. When it arrives at the mating hole or notch, the catch on the release lever springs into place, positively locking the device in place

Removal steps:

1. Press the Release lever tab
2. While depressed, lift the device upward, detaching from the mount

View product →

PRC 5

View product →

Phone with Otterbox Defender

Includes an Otterbox Defender case and the Defender Series Holster.

The Otterbox is attached to a QRP (Quick Release Plate).  If you do not need a QRP the price is $210.00. 

Please provide the make and model of phone.  Not all compatible phone types are listed.  We can attach to most phones...call us!

***SEE MORE PHONE OPTIONS HERE***

View product →

Tilt Plate Adapter

Compatible with Daessy (takes 7/8" size clamps), and  Rehadapt (takes 7/8" size clamps).

The Tilt Plate with clamps allows attachment of a device with a Mount'n Mover Quick Release Plate to floor stands and table hardware with round tubing.

View product →

Multi1 Plate

The Multi1 device plate was developed to attach to devices with VESA hole spacing.    Lightbox (APH for the Blind), Skyle (Inclusive TLC), and RM Speech (with a Getac case) are some of the devices where this plate is used.

Multi1 Plate intructions   

View product →

Device Plate for Accents 700, 800 & 1000

View product →

Device Plate - VESA

Compatible with VESA Mounting Interface Standard (MIS):

• 100mm x 100mm, M4 
• 75mm x 75mm, M4 

Compatible with Tobii C15.

Has QRP attachment inserts for up to 6" (150mm) offset from top attachment.

View product →

Device Plate - ATS/EZ-Comm

For: ATS / EzCOMM Devices NEW!!

View product →

Device Plate-AbleNet

For device(s): BIGmack, BIG Step-by-Step, Big Red, FL4SH

View product →

Device Plate - Camera 3

For any "point-and-shoot" cameras

Get great positioning and access for your cameras! Works for any camera with ¼" mounting
Please contact us for mounting heavier cameras

• Attaches directly to Quick Release Plate
• Compatible directly with most cameras and tripod heads
• 1/4" and 3/8" screws supplied
• Secure attachment

Manfrotto tripod heads shown (available through camera stores)

• Model 234RC: Tilt Head with Quick Release
• Model 391RC2: Photo/Video Pan and Tilt Head

View product →

Device Plate - Universal Rotator

NEW!! An additional degree of freedom! Infinite angle locking is great for eye-gaze systems and iPads!

Compatible with all Mount'n Mover device(s).

The Universal Rotator adds a degree of freedom! Adjust the angle between the Mount'n Mover Quick Release Plate and the device plate (attached to a device or tray).
Turning the knob adjusts friction between the rotating plates, letting you lock the rotation at any angle.

Rotation angle adjustment is great for eye-gaze systems, or iPads and tablets that can move from landscape to portrait.

Universal Rotator Instructions

View product →

Tobii I-Series

Compatible with Tobii I series devices:

I-12

I-15

Use with any Quick Release Plate (QRP).   

Add a Universal Rotator (DP-UR) for optimal positioning throughout the day.

You can attach to the i-series with either the Quick Release Plate (QRP) or the Quick Connect Receiver (QCR)

           DP-T2 Instructions

Can be used in combination with a Quick Connect Plate (QCP) and a Quick Connect Receiver (QCR) if needed.

             Quick Connect Receiver (QCR) to DP-T2

View product →

Quick Release Plate

QRP serves as the easy attach-and-release component between the Mounting system and your device(s) of choice

User Controls: Easy-access, one-handed operation - hook handle up and out to unlock

Note:1 QRP included with each Mount'n Mover (Locking Model).

View product →

Stand + 90°

Two products in one!
Table stand for devices or trays: 
Use with any device plate or tray
Locks at 0° and 55° on tables
Downward Tilt for mounted devices. 
Attach between device plate (or tray) and QRP.
Ideal for bed access, Use tilt lever to lock from 0° to 180°

• The Stand + 90° is compatible with all Mount'n Mover device attachment accessories, and can be used in combination with the Universal Rotator.
• The Stand + 90° can be used as a "stand-alone" product, without a Quick Release Plate, but you will need one to attach your device to a Mount'n Mover arm.

View product →