Neo

Neo: Approach 1: Attach by sandwiching an Adapter Plate with the Light fixture plate. Approach 2: Drill holes in the side frame and attach an Adapter plate or L-Angle with bolts and nuts.

Neo Side View: The front light fixture is just behind the footrest hangers and is attached with two screws.

Close-up top view of light attachment: Note the two screws. Remove the light fixture and sandwich an Adapter Plate 2 between it and the frame. Longer bolts will be necessary. Note: this has not been tested.

Add an L-Angle extension to get around the armrest.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

Approach 1
Approach 2

How to mount:

Sandwich between light fixture plate and frame, using holes in side frame; use L-Angle extension plate get around lights

Recommended mounting hardware:

Adapter Plate 2 (WC-AP2)

L-Angled Extension Plate (WC-LAE) (2)

Solid Wheelchair Bracket (WB2)

Installation support:

Mounting to Frames by Sandwiching Components

Suggested extra parts

Other hardware:

May require longer bolts (unknown length)