Trak

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Attach the oval tube clamps loosely to the frame. Bridge the WC-AP4 plate across the oval clamps. Attach the post clamp (WB2) to the AP4 plate. If necessary, attach the Angle Adjust Plate (WC-AAP) between the AP4 and WB2 to correct the post clamp to vertical.

Watch our step-by-step guide where owner, Peter Loeffler, walks you through how to attach to your chair. If there is a problem with the embedded video, here is the link to the YouTube Playlist:

https://youtube.com/playlist?list=PLicITkmTakB5BlZ-_BjVPqjJ__hwMh7Rb&si=YWFXa9wyJFKdgH4y

Recommended mounting hardware:

Oval tube clamp-Sunrise/Quicke (WC-OVALTUBECLAMP) (WC-OVALTUBECLAMP SET)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

Solid Wheelchair Bracket (WB2)