Quickie T-Nut

The Quickie T-Nut slides into the track along the seat.  The adapter plate (WC-AP4 or WC-AP2) attaches to the T-Nut via the M6 bolts included with the T-Nut.   Mount as close up to the front of the track as possible.

View product →

Post Clamp Extension

The post clamp extension plate is 7.25" long x 2" tall.  The plate is 1/4 inch thick steel.  This extension is designed to give the post clamp (WB2) more forward extension for eyegaze.    It comes with hardware to attach to the Permobil dual track and bolts to connect it to another adapter plate, collar clamps, bridge clamps etc.

WB2-EXT Instructions

View product →

21st Century Scientific WC Clamp

View product →

Rifton Adapter Plate for Hi/Lo Activity Chair

The Rifton Adapter Plate (WC-AP8X) has hole spacing to attach to the 830, 850, and 870 Activity Chair with Hi/Lo base.   The adapter plate comes as a kit with two shoulder bolts to use to attach it to the side of the chair.   A Post Extension Kit (PEK-18) would then be attached to the WC-AP8X to get the post out in front of the tray.

Rifton Adapter Plate Instructions

View product →

Shoulder Bolt for Rifton HiLo activity chairs

Alloy Steel Shoulder Screw, 5/16" Shoulder Diameter, 1-1/4" Shoulder Length, 1/4"-20 Thread
Overall length top to bottom= 1.900.   Drive- 4mm allen wrench

**** Sold as a pair *****

View product →

DAH-R82-HARDWARE

Hardware for attaching adapter plates to the R82 Multi Frame:

 (x5) M6 x 25mm Flat Head Screw,   

 (x5) M6 Nylon Insert Lock Nut,     

 (x3) 1/4"  Length Nylon Spacer,   

 (x4) 1/4-28 x 1/2" Socket Head Screw.

View product →

Adapter Plate 5

Plate size: 5.0" x 2.0" x .25"

Longest plate for offsets; 3/4" longer than WC-AP2

Parallel slots allow for sandwiching of two plates

Four threaded holes allow for Wheelchair Bracket or additional Offset Plates

Threaded holes provide easy securement of Wheelchair Bracket or Offset Plate

View product →

Kimba-Neo Kit (WC-Kimba Neo Clamp)

The Kimba Neo clamp is specifically profiled for the Kimba Neo stroller and is a very solid base of support.

Any of the Adapter Plates attach to the clamp, using one of the holes and a slot. The Angle Adjustment Plate can attach to the Adapter plate to allow for the vertical positioning and attachment of the Solid Wheelchair Bracket. This guarantees the post will be nearly vertical.

Be sure and order an Adapter Plate and an Angle Adjustment Plate (WC-AAP) when ordering the Neo Clamp.

View product →

Wheelchair Bracket-Daessy Adapter (WB-DAESSY)

Compatible with Daessy wheelchair hardware.

Connects to any Daessy Inner piece clamp or adapter.

**If you have an old Daessy frame clamp in usable condition, you can connect this product to it and use your old clamp.**

You can attach to some Daessy hardware with the Adapter Plate (WC-AP)--see the photo.

View product →

PDG FUZE Kit

Includes:

• AP4 plate
• (2) 5/16-18 x 2" Hex bolts
• (2) Spacers: 5/16" ID, 1/2" OD x 1/4" long

View product →

Dove Tail Nut (WC-DOVETAIL-NUT)

Fits Quickie/Sunrise Medical DoveTail slide track

Kit includes:

• Pair of dovetail nuts, with 1/4-28 threads
• 2 lengths of screws
• 2 washers

View product →

Collar Clamp (WC-COLLAR)

Contains one set of two clamps

1/4-28 tap for attaching Adapter Plate

If you need a different tube size, contact us.

HOW TO MEASURE TUBE CIRCUMFERENCE

View product →

Tube Coved Spacer Kit (WC-COVED-)

Provides improved stability when attaching a flat plate to a round tube (Adapter Plate NOT included)

Includes 1 each:

• 1" coved nylon spacer
• Washer
• Bolt (1/4-28 x 2")
• Lock nut (1/4-28)

Use 2 when using them to attach an Adapter Plate.

View product →

L-Angled Extension Plate

Can be used singly to offset mounting at a 90°, or used in pairs to extend mounting from 2.25" to 4.5" Fully compatible with all wheelchair mounting hardware.

 LAE (L-Angle Extension Plate) instructions

View product →

Adapter Plate 4

Plate size: 3.75" x 2.25" x .25"

More compact than WC-AP2

More options for attaching with 5/16" or 8mm bolts

Five threaded holes allow 4 placements of Wheelchair Bracket or Offset Plates

Threaded holes provide easy securement of Wheelchair Bracket or Offset Plates

Adapter Plate 4 Instructions

View product →

Adapter Plate 2

Plate size: 4.75" x 2.25" x .25"

Longest plate for offsets; 1" longer than WC-AP4

Parallel slots allow for sandwiching of two plates

Four threaded holes allow 3 placements of Wheelchair Bracket or Offset Plates

Threaded holes provide easy securement of Wheelchair Bracket or Offset Plates

View product →

Adapter Plate

Plate size: 3" x 1.75" x .25"

Lowest profile of the Adapter Plates

Two threaded holes allow easy securement of Wheelchair Bracket or other plates

View product →

T-nut

Compatible with TDX and Quantum slide tracks.

View product →

Round clamp (WC-R-)

Clamps to round tubing when bolting is not an option. Select from 1" or 7/8" size.

View product →

Bridge clamp (WC-R1B/R7/8B)

Bridge clamps must always be used in pairs, and in combination with an Adapter Plate. The Adapter Plate spans the Bridge clamps to create a solid attachment. 

Choose from 1", 7/8", mixed pairs and Collar clamps. Eliminates tube-slip if clamped at right-angles.

HOW TO MEASURE THE TUBE CIRCUMFERENCE

(Round Clamps and Bridge Clamps only come in 7/8" and 1" sizes.  If you need another size check out the Collar Clamps

View product →

Angle Adjustment Plate

Allows for rigid mounting at various angles

Mount post at a nearly vertical angle, even when attached to an inclined frame section

Attach at increments of 7.5° 

Compatible with Wheelchair Brackets and bracket mounting hardware

View product →