Freestyle

Freestyle has thru holes in the frame, set back a ways.
In this case, the mount must be "offset" to the side to clear the tray
First, attach the AP4 to the frame
Next, attach the L-Angle Extension to the AP4. Additional offsets could be used as needed.
The Mount'n Mover Wheelchair Bracket and post are "offset" to clear the tray

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach Adapter Plate 4 (or AP2) to frame through holes; attach one or two L-Angle Extension plates to move outward and forward.

Recommended mounting hardware: 

Solid Wheelchair Bracket (WB2)
Tube Coved Spacer Kit (WC-COVED-) (WC-Coved-1, WC-Coved-7-8)
Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE) (2)

Installation support: 

Round Tubes - With Holes
Suggested extra parts

Other hardware: 

Longer bolts and lock nuts required to go through the Adapter Plate and wheelchair frame