Easy300

Leg rest swings to the inside, if that makes it easier to remove.
Attach bridge clamps to the horizontal tube and vertical tube, bridging them with an Adapter Plate.
Use L-Angle Extension plates (WC-LAE) as Offsets

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach using a Bridge clamp, with one clamp to the horizontal tube, and one to the vertical section, just under the weld. Possibly attach Adapter plate to the inside, and use an L-Angle Extension to bring it to the outside for attaching the Wheelchair Bracket. The vertical tube is 1", and the hoizontal tube is 7/8".

Recommended mounting hardware: 

Solid Wheelchair Bracket (WB2)
Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE)

Installation support: 

Round tubes - Bridge Clamps, Round Clamps, and Collar Clamps