Q300 M Mini (Pediatric)

Zippie Q300 M Mini
Zippie Q300 M Mini holes through frame

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attachment hardware depends upon the type of footrest that is on the wheelchair.  The foot plate on the center leg rest  has through holes along the horizontal framing.  The attachment hardware in this case would be the WC-Coved Spacers.

 If the wheelchair has the swing away foot hangers then the attachment hardware would be the WC-R1B-Bridge Clamp Set.   Attach one bridge clamp to the horizontal and one to the vertical tube on the foot hanger.    

Recommended mounting hardware: 

Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE)
Solid Wheelchair Bracket (WB2)
Tube Coved Spacer Kit (WC-COVED-) (WC-Coved-1, WC-Coved-7-8)