Mygo Max Seat

Loosen the bolt so the tube will slide in.

Slide the tube out to the desired position and tighten the bolt to secure it.

Use offsets as needed. Adapter plate move it forward.

Use the Angle Adjustment Plate to position the Wheelchair Bracket and post at a good angle.

The Mount'n Mover is attached and can be positioned where it is needed.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Insert the Leckey Bracket into the square tube. Attach components to the flat plate welded to the end of the square tube. Attach Offsets as needed to position the Wheelchair Bracket.