Rodeo

Covaid rodeo with 7/8 bridge clamps, ap4, aap, and WB2
Convaid Rodeo Stroller use collar clamps or bridge clamps

Documents: 

PDF icon Convaid Rodeo attachment document

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach 7/8" collar clamps or 7/8" bridge clamps to the round tubing shown.  Attach the WC-AP4 to the clamps.  Because the clamps are downward sloping you will need a WC-AAP to adjust the post clamp (WB2) to vertical.

Recommended mounting hardware: 

Collar Clamp (WC-COLLAR) (WC-COLLAR-75, WC-COLLAR-875, WC-COLLAR-1, WC-COLLAR-1125, WC-COLLAR-30, WC-COLLAR-1250, WC-COLLAR-1375, WC-COLLAR-150)
Adapter Plate 4 (WC-AP4)
Angle Adjustment Plate (WC-AAP)
Solid Wheelchair Bracket (WB2)