Little Wave Flip

Bridge Clamps_AP4_WB2
Use one inch bridge clamps
Close up view of bridge clamps
Inside view of bridge clamps
Close up of AP4 and WB2

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use 1 inch bridge clamps on the horizontal and vertical  tubes.  Bridge across the clamps with a WC-AP4 plate.   If the chair is always at a tilt, use the WC-AAP (angle adjust plate) before adding the WB2 ( post clamp).

Recommended mounting hardware: 

Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
Solid Wheelchair Bracket (WB2)
Angle Adjustment Plate (WC-AAP)