Myon

An Adapter Plate 4 or 2 can be used to create the Bridge (AP2 is shown). You will need an Angle Adjust Plate and possibly an L-Angle plate to position the Wheelchair Bracket to avoid the brake handle and footrest.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Attach using two 1" bridge clamps and an Adapter Plate 4 (or AP2). You will need an Angle Adjust Plate and an L-Angle plate to offset the Wheelchair Bracket to avoid the brake handle and the footrests.